Cukurova University,Department of Textile Engineering, Main Branch of Textile Technology

June 22, 2016

Commercialized Denim Fabric Production with Post-Industrial and Post-Consumer Wastes

The purpose of this study was to produce 100% recycled denim without a tradeoff in quality according to zero waste concepts.

Initially, the waste points from raw materials to final product in denim fabric production process were determined.

Then, denim fabrics were produced from post-industrial (recycled cotton fibers obtained from denim wastes) and post-consumer wastes (produced from recycled PET bottles).

Classic cotton fibers and alternative regenerated cellulose fibers (Tencel®) were used as carrier fiber in addition to mentioned fibers for eliminating recycled fibers disadvantages.

The effect of fiber types on yarn or fabric characteristics were investigated in accordance with planning design and construction.

Furthermore, the relationships between fibers and yarns/fabric results were statistically evaluated using correlation analysis.

The results of this investigation show that the amount of fibers have a significant effect on yarn unevenness, thick places, neps, hairiness, air permeability and abrasion resistance of the samples.

Source: Tekstil ve Konfeksiyon
Publisher: Ege University Textile and Apparel Research & Application Center
Original Language: English
Document type: Article / Open Access



Cited by 6 documents except author up to this time :

1. Kaynar Taşcı, Z., & Çelik, N. (2021). The Effect of Using Silver Fiber Content Yarns in Shirting Fabrics on Abrasion Resistance and Pilling Properties. Journal of Natural Fibers, 1-9.

2. Karunaratne, P. V. M., Wijayakuruppu, M. B. M. W., Wijayapala, U. G. S., & Ranathunga, G. M. (2021). A study on the factors influencing the preference of Sri Lankan consumers for the use of denim jeans. Journal of Advanced Research in Social Sciences and Humanities, 5(6), 217-232.

3. Majumdar, A., Shukla, S., Singh, A. A., & Arora, S. (2020). Circular fashion: Properties of fabrics made from mechanically recycled poly-ethylene terephthalate (PET) bottles. Resources, Conservation and Recycling, 161, 104915.

4. Ute, T. B., Celik, P., & Uzumcu, M. B. (2019). Utilization of Cotton Spinning Mill Wastes in Yarn Production. In Textile Industry and Environment. IntechOpen.

5. Üzümcü, M. B., & Kadoğlu, H. (2018). Estimation of Tensile Strength and Unevenness of Compact-Spun Yarns By Using HVI Fiber Properties. Tekstil ve Konfeksiyon, 28(3), 241-247.

6. Béchir, W., Béchir, A., & Mohamed, B. H. (2018). Industrial cotton waste: Recycling, Reclaimed fiber behavior and quality prediction of its blend. Tekstil ve Konfeksiyon, 28(1), 14-20.



Last Updated: 13.07.2021
Share: